Need help?Do you have a question about the Snap-On EEDM575D and is the answer not in the manual?
General| Brand | Snap-On |
|---|---|
| Model | EEDM575D |
| Category | Measuring Instruments |
| Language | English |
Details the EEDM575D as a hand-held, autoranging clamp-on DMM with advanced features.
Certifies Snap-on Model EEDM575D conformity to EU directives and lists relevant safety standards.
Provides essential safety advice for operating the EEDM575D, including precautions and prohibitions.
Lists key features like CE/IEC compliance, Analog Bar Graph, NCV, Min/Max, REL, and Auto Off.
Details applications for HVAC/R, Electrical, and Electronic measurements with the EEDM575D.
Provides detailed technical specifications for DC VOLTS, AC VOLTS, and AC AMPS measurements.
Explains the functions of push buttons, rotary switch, and input jacks for operating the meter.
Step-by-step guides for measuring DC Voltage and AC Voltage.
Guides for Resistance, Amps, Continuity, Diodes, Capacitance, Frequency, Microamps, and Temperature.
Explains the Non-Contact Voltage (NCV) feature, its operation, and important safety warnings.
Details the Relative mode (REL) for storing a reference value and deducting it from subsequent measurements.
Explains Record Mode (MAX/MIN) for capturing maximum and minimum readings during a test.
Describes Peak Hold Mode (P-H) for measuring peak voltage or current, useful for inrush current.
Explains Manual Ranging (R-H) and Data Hold (D-H) functions for meter operation.
Describes the NCV and continuity visual LED indicators located at the top of the meter.
Provides guidance on measuring AC Volts in terminal blocks, including safety and wiring checks.
Explains measuring DC Voltage of batteries under load for accurate readings and applications in furnaces.
Details measuring motor resistance, emphasizing power disconnection and checking for open or shorted windings.
Guides on measuring motor AC Amps, distinguishing between running and in-rush/start-up current.
Explains how to measure temperature differential using the REL function and a K-type thermocouple.
Lists common problems like no power, incorrect readings, and NCV not working with probable causes.
Provides instructions for replacing the battery and fuse, including safety precautions and correct fuse value.
Instructions for cleaning the exterior surfaces of the EEDM575D using a mild detergent and damp cloth.
Information on optional accessories, their UL evaluation status, and safety guidelines for use.
Explains the barrier function as providing protective distance and reducing touch danger on cables.
To Next Page
