B. SAFETY CONSIDERATIONS
WARNING: Please follow manufacturers test pro-
cedures whenever possible. Do not attempt to mea-
sure unknown voltages or components until a com-
plete understanding of the circuit is obtained.
Read instructions before operating:
Be sure these instructions accompany the tool when
passed from one user to a new or inexperienced user.
Equipment is used in a manner not specified by the
manufacturer, the protection provided by the equip-
ment may be impaired.
GENERAL GUIDELINES
ALWAYS
• Test the EEDM575D before using it to make sure it is
operating properly.
• Inspect the test leads before using to make sure there are
no breaks or shorts.
• Double check all connections before testing.
• Have someone check on you periodically if
working alone.
• Have a complete understanding of the circuit
being measured.
• Disconnect power to circuit, then connect test leads to
the EEDM575D, then to circuit being measured.
NEVER
• Attempt to measure unknown high voltages.
• Attempt to measure DC microamps with the meter in
parallel to the circuit.
• Connect the test leads to a live circuit before
setting up the instrument.
• Touch any exposed metal part of the
test lead assembly.
5
To Next Page
Loading...
Need help?
General
