Snap-On ELITE - Getting Started; Selecting a Language

1. Press the Menu button
2. Use the Control Buttons to
Toolbar Icons Control Buttons
Getting Started
3. Press and release the Power Button to turn on the Thermal Imager.
i
Expert Tips - view experience
based troubleshooting tips
Gallery - view saved images
and video
Settings - adjust device settings
Delete - delete saved fi les
N - cancel selection
Y - make (accept) selection
Up/Down - navigate the menu
options
Left/Right - navigate the toolbar
1. Connect the supplied USB cable to the micro USB jack on the top of the
Thermal Imager, and to the USB power supply adapter.
2. Connect the USB power supply adapter to a live power source.
The battery charging LED will turn on.
Downloading the User Manual
Download the Diagnostic Thermal Imager Elite User Manual at:
Your Thermal Imager is shipped with a partial battery charge. It is recommended
that the battery is fully charged before use.
Using the Menus and Toolbar
i
Powertrain & Exhaust
Body and Electrical
Chassis & Brakes
HVAC
List all Tips
Selecting a Language
1. Press the Menu button, then select the Settings icon from the toolbar.
2. Select the Language menu option, and then select the desired language.
Toolbar
to open the Main menu.
navigate the toolbar and
menus.
North America - diagnostics.snapon.com/usermanuals
Australia / New Zealand - snapontools.com.au/diagnostics/technical_information/
platform_manuals
Red - battery charging
Green - battery charged