Snap-On POLARTEK HYBRID EEAC332 - STARTING THE AUTOMATIC PROCEDURE

• 19 •
Automatic BP calibration can be done
only after a PA/C calibration and with a
minimum of 1kg of gas inside the tank.
Press OK
USED OIL CELL
TANK PRESSURE
PB
AUTOMATIC CALIBRATION
Press OK
TANK PRESSURE
TANK PRESSURE
PB
AUTOMATIC CALIBRATION
Close the red tank valve
Press OK
TANK PRESSURE
Make sure that HP and LP
couplings are disconnected from
A/C system or else
Press OK to continue
xx
xx
xx
oz
oz
oz
oz