Snap-On SVT270B User Manual

SVT270B
VACUUM TEST KIT
The SVT270B Hand Vacuum Tester is a quality tool suitable for testing the many
vacuum systems found in automobiles. Each SVT270B is factory tested to vacuum
levels which easily meet the testing requirements of automotive vacuum.
INTRODUCTION

Snap-On SVT270B Specifications

General

Model	SVT270B
Category	Test Equipment
Type	Digital Multimeter
Resistance Measurement	40MΩ
Battery	9V
Power Supply	Battery
Measurement Functions	Voltage, Current, Resistance, Continuity, Diode Test
Max Current Measurement	10A
Operating Voltage	9V
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)

Summary

Product Introduction

Safety Warnings

Flammable Liquid and Fumes Hazard

Warning about flammable liquids and fumes igniting, advising safety shield and ventilation.

Pressurized Equipment Safety

Caution on exceeding pressure ratings and wearing safety gear for pressurized systems.

Fluid Leak Precautions

Advice on handling fluid leaks and using well-ventilated areas to prevent illness.

Particle Projection Hazard

Warning to avoid directing streams at body to prevent injury from propelled particles.

Operating Instructions

Troubleshooting Guide

O-Ring Material and Usage

Parts List

Detailed list of all components for the SVT270B vacuum tester, including part numbers.

Warranty, Service, and Repair

Seller's Obligations and Limitations

Details seller's warranty obligations and liability limitations for the equipment.

Warranty Exclusions

Lists conditions and circumstances not covered by the product warranty.

Service Request Procedure

Outlines the process for requesting warranty service and required proof of purchase.