Snap-On POLARTEK HYBRID EEAC332 - MAINTENANCE MENU OPTIONS; A;C PRESSURES CHECK PROCEDURE

• 28 •
Replace drain cap, refill vacuum
pump with new oil to the center of
control glass then replace filling cap.
When done press ENTER to exit
R134a MAINTENANCE
VACUUM PUMP OIL CHANGE
Unscrew the fitting cap and
the drain cap then remove used oil
from vacuum pump
then press ENTER
R134a MAINTENANCE
VACUUM PUMP OIL CHANGE
R134a MAINTENANCE
Hours remaining (hh:mm)
XX:XX
Do you want to change the oil?
YES
NO
VACUUM PUMP OIL CHANGE
2
FIG. 23
TOOLS:
 Funn
el
 Disp
osal
conta
iner
 Allen
wren
ch n°
5; 8.
4