• 35 •
And if necessary will recover it
Then the following screen is displayed:
Type the filter code and press ENTER to delete the alarm. If the
filter code is not available, call the Service Center:
Remove the dryer filter, use the special wrench (ref Fig. 18)
Press ENTER to continue:
Take the new filter
, wet with clean POE oil both o-rings, and
verify that they are correctly placed into their slots, press ENTER:
Insert the new dryer filter, use the special wrench (ref Fig. 19),
Verify that both o-rings are correctly placed into their seats
press enter
R1234yf MAINTENANCE
CHANGE DRYER FILTER
Insert new dryer filter
use the special wrench
and press ENTER
R1234yf MAINTENANCE
CHANGE DRYER FILTER
Screw
DRYER
FILTER
Remove the dryer filter
use the special wrench
and press ENTER
Unscrew
R1234yf MAINTENANCE
CHANGE DRYER FILTER
DRYER
FILTER
R1234yf MAINTENANCE
.,
Reset service alarm
Enter filter code
_________________
5
JKL
4
GHI
3
DEF
2
ABC
1
←
0
|_|
9
WXYZ
8
TUV
7
PQRS
6
MNO
.,
CHANGE DRYER FILTER
Recovering gas from filter…
CHANGE DRYER FILTER
R1234yf MAINTENANCE
Verifying gas presence in filter…
CHANGE DRYER FILTER
R1234yf MAINTENANCE
FIG. 18
To Next Page
Loading...