• 42 •
CHANGE ANALYZER FILTER
NOTE: Wear protective gloves and glasses
The gas analyzer filter must be replaced when the machine
visualize the “change analyzer filter” alarm message (usually
every 150 analysis):
Press ENTER to proceed with filter substitution, the following
screen will be displayed:
Remove the transparent protection by unscrewing the two
screws. Press ENTER to continue, the following screen will be
displayed:
Remove the filter. Press ENTER to continue, the following screen
will be displayed:
Insert the new filter, make sure that the arrow on the filter is
aligned with the one on the analyzer. Press ENTER to continue,
the following screen will be displayed:
Reposition the transparent protection by screwing the two
screws. Press ENTER to continue, the following screen will be
displayed:
Type the RESET CODE from the spare pair filters box, then press
ENTER to continue, the following screen will be displayed:
RESET ANALYZER FILTER COUNTER is now successfully
completed, press ENTER to exit.
NOTE: Failure to replace the filters could result in oil damage
to in the analyzer and the voiding of the warranty.
Code correct
Press ENTER
R1234yf MAINTENANCE
CHANGE ANALYZER FILTER
R1234yf MAINTENANCE
.,
RESET ANALYSER COUNTER
enter filter code
_________________
5
JKL
4
GHI
3
DEF
2
ABC
1
←
0
|_|
9
WXYZ
8
TUV
7
PQRS
6
MNO
.,
Reposition the transparent protection by screwing the two
screws. Press ENTER to continue
R1234yf MAINTENANCE
CHANGE ANALYZER FILTER
Insert the new filter, make sure that the arrow on the filter
is aligned with the one on the analyzer.
Press ENTER to continue
R1234yf MAINTENANCE
CHANGE ANALYZER FILTER
Remove the filter
Press ENTER to continue
R1234yf MAINTENANCE
CHANGE ANALYZER FILTER
Remove the transparent protection
by unscrewing the two screws.
Press ENTER to continue
R1234yf MAINTENANCE
CHANGE ANALYZER FILTER
It is necessary
to replace analyzer filter.
Press ENTER to proceed
with filter substitution.
Press ESC to exit.
R1234yf MAINTENANCE
CHANGE ANALYZER FILTER
Caution
To Next Page
Loading...