To Next Page
M
Michael BradyAug 9, 2025
Why won't my Snapper Pro S200XT Lawn Mower engine turnover or start?
- RrussellaustinAug 10, 2025
If your Snapper Pro Lawn Mower engine won't turnover or start, make sure the parking brake is engaged and the PTO (electric clutch) switch is in the OFF position. Also, ensure the ground speed control levers are in the "NEUTRAL" position. Check if you are out of fuel and refill if necessary, allowing the engine to cool first if it's hot. Other potential issues include a blown fuse (replace it), dirty battery terminals (clean them), a discharged or dead battery (recharge or replace it), or loose/broken wiring (check and fix). For flooded engines (Carburated Models), move the choke control to the closed position.
General
