To Next Page
J
Jennifer BurtonAug 1, 2025
What to do if my Snapper Pro S200 XT engine will not turnover or start?
- SScott OrtizAug 1, 2025
If your Snapper Pro Lawn Mower engine won't turn over or start, it could be due to several reasons. One potential cause is a faulty safety interlock switch, which may need replacement by an authorized service dealer. Another reason could be faulty, fouled, or incorrectly gapped spark plugs, which should be cleaned, gapped, or replaced according to the engine manual. Additionally, water or old fuel in the fuel tank can prevent the engine from starting, so drain the fuel and replace it with fresh fuel. Finally, for fuel-injected models, a malfunction in the fuel injection system could be the culprit, and you should consult an authorized service dealer.
General
