EasyManua.ls Logo

Snapper Pro S200 XT - Roll Bar and Seat Belt Safety; Roll Bar and Seat Belt Inspection; Understanding Safety Decals

Snapper Pro S200 XT
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Not for
Reproduction
11
Inspection and Maintenance of the Roll Bar
Seat Belt
WARNING
Failure to properly inspect and maintain the seat belt can
cause serious injury or death.
3
The seat belt like the ROLL BAR, needs to be
periodically inspected to verify that the integrity has not
been compromised through normal machine use, misuse,
age degradation, modifications, or a roll over. If the seat
belt does not pass all of the following tests, it should be
replaced.
BEFORE EACH USE – Conduct the following
inspections/maintenance of the seat belt and retraction
mechanism:
1) Check for dirt or debris in the retraction mechanism. If
dirt or debris is found, it should be removed.
2) Check to make sure the retraction mechanism retracts
easily and completely.
3) Check for damage to any part of the seat belt (A,
Figure3) such as nicks, cuts, loose stitching, or fraying.
4) Check that the buckle and latch (B) operate properly
and that the latch plate is not excessively worn,
deformed, or the buckle is damaged or cracked. The seat
belt should latch and release easily.
Safety Decals and Symbols
Read the safety decals before operating your unit. The
cautions and warnings are for your safety. Understand and
follow all safety decals to reduce the risk of a personal injury
or property damage.
WARNING
If any safety decals become worn or damaged and
cannot be read, order replacement decals from your
local authorized Snapper Pro® servicing dealer.
4
* Located near the transmissions fans.
** Located on the roll bar pockets on the frame of the unit.
A. Part Number: 84008252 - Decal, Main Safety
B. Part Number: 84008198 - Decal, Warning, Pinch Point
C. Part Number: 84007896 - Decal, Danger, Cut Hand/
Foot
D. Part Number: 84008200 - Decal, Warning, Hand in Belt
E. Part Number: 5104082YP - Decal, Warning, Folding
Roll Bar
F. Part Number: 5104083YP - Decal, Caution, Folding
Roll Bar
G. Part Number: 5100405YP - Decal, Warning, Roll Bar
and Overhead Obstacles
H. Part Number: 84008199 - Decal, Warning, Roll Bar
Removed
Decal, Main Safety
Part Number: 84008252

Table of Contents

Related product manuals