EasyManuals Logo

Snapper 285Z Series User Manual

Snapper 285Z Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
RIDER AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off rider and mower deck
Clean debris from engine compartment
Check transmission oil levels
Every 25 Hours or Annually *
Check tire pressure
Check mower blade stopping time
Check rider and mower for loose hardware
Every 50 Hours or Annually *
Check rider brakes
See Dealer Annually to
Lubricate rider and mower
Clean battery and cables
Check mower blades **
Replace transmission oil filters
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or Annually *
Clean engine air filter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil filter
Annually
Replace air filter
Replace pre-cleaner
See Dealer Annually to
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
* Whichever comes first
** Clean more often in dusty conditions or when airborne
debris is present.
Maintenance Chart
Maintenance
Not for
Reproduction

Other manuals for Snapper 285Z Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Snapper 285Z Series and is the answer not in the manual?

Snapper 285Z Series Specifications

General IconGeneral
Engine BrandBriggs & Stratton
Cutting Width28 inches
Cutting Height1.5 - 4 inches
Cutting Height AdjustmentLever
Drive SystemRear-Wheel Drive
Wheel Size16 inches (rear)
Warranty2 years

Related product manuals