To Next PageTo Next Page
Need help?Do you have a question about the Snapper 500ZB2748 and is the answer not in the manual?
General| Engine Power | 6.75 ft-lbs Gross Torque |
|---|---|
| Cutting Width | 21 inches |
| Deck Material | Steel |
| Weight | 82 lbs |
| Engine | Briggs & Stratton 725 Series |
| Cutting Height | 1.25 - 3.75 inches |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge Capability | Yes |
| Starter Type | Recoil |
| Engine Type | Briggs & Stratton |
| Drive Type | Self-propelled |
| Drive System | Rear Wheel Drive |
| Wheel Size | 8 inches (front), 11 inches (rear) |
Core safety guidelines, training, preparation, and operating rules for safe use.
Crucial information on operating safely on slopes and associated hazards.
Details risks from blades and mechanical components.
Covers safety around terrain features, fuel handling, and enclosed areas.
Explains the meaning of safety labels, icons, and warning symbols.
Describes the unit's safety interlock features and checks.
Locating and recording essential product identification numbers.
Brief descriptions of the purpose of individual controls.
Explanations of specific controls like PTO, parking brake, and throttle.
Pre-operation safety, and initial checks before starting.
Procedures for setting tire pressure and adjusting the operator's seat.
Adjusting cutting height and foot pedal position.
Engine start, stop, and pushing the unit.
Learning maneuvers for zero-turn operation.
How to mow, patterns, and best practices for lawn care.
Guidelines for safely towing accessories.
A summary of recommended maintenance tasks by interval.
Procedures for adding fuel, checking filter, and oil changes.
Locations and methods for lubricating the unit.
Procedures for transmission oil, filters, and drive belts.
Inspecting, sharpening, and balancing mower blades.
Adjusting ground speed levers and parking brake.
Procedures for deck rod timing and leveling.
Caring for the battery and preparing the unit for storage.
General guide to common problems and their solutions.
Troubleshooting for rider and mower components.
Diagnosing and fixing issues affecting grass cutting quality.
Technical details of the unit's components.
Physical measurements and weight of the mower.
Tool and instructions for determining slope angles.
A designated area for user annotations.
Details on warranty terms, coverage, and exclusions.
