Snapper 5900528 User Manual

Not for
Reproduction
22
www.SnapperPro.com
Maintenance Schedule
The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of your
operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter.
Safety Items Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 250
Hours
Spring &
Fall
Check Safety Interlock System
• •
Check Rider Brakes
• •
Check Mower Blade Stopping Time
• •
Rider Maintenance Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 250
Hours
Spring &
Fall
Check Rider / Mower for loose hardware
• •
Clean Deck & Check / Replace Mower Blades**
•
Lubricate Rider & Mower **
•
Clean Battery & Cables
•
Check Tire Pressure
•
Check Transmission Oil
• •
Change Transmission Oil Filter **
•
Engine Maintenance Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 250
Hours
Spring &
Fall
Check Engine Oil Level
•
Check / Clean Cooling Fins & Intake **
•
Service Air Filter *
Change Oil & Filter *
Check / Replace Spark Plugs *
Check / Replace Fuel Filter *
Check / Clean Spark Arrester*** Every 50 hours
* Refer to engine owner’s manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** If equipped. Replace if damaged.
Regular Maintenance
Regular Maintenance

Snapper 5900528 Specifications

General

Brand	Snapper
Model	5900528
Category	Lawn Mower
Language	English