Footnotes:
Manual No.
700627830" STANDARD DECK
SERIES 23
5
Wheels - Front & Rea
Part No Descri
tionItem Qty
1 7058943 2 ASSEMBLY, Front Tire & Rim (11.0”) (Complete) (Includes items 2, 3, 4, 5 & 6)
2 7073563 1 TIRE, 11 x 4.00-4 (Kenda)
3 7017146 1 RIM (For 11.0 x 4.0 x 4 Tire)
4 7011807 2 BALL BEARING, Flange (3/4” I.D.)
5 7012234 1 VALVE STEM, Snap In
6 7014669 1 * LUBE Fitting, Straight (for 3/16" hole)
6 7076998 1 * LUBE Fitting, Straight (for 1/4" hole)
6 7010909 1 * LUBE Fitting, 90 Degree, Ball Check (for 1/4" hole)
6 7104428 1 * LUBE Fitting, 90 Degree, Ball Check (for 5/16" hole)
7 7031038 2 CAP, Dust
8 7011032 2 SEAL, Felt
9 7010935 8 WASHER, .77 x 1.13 x .06 Flat
10 7011022 2 HUB CAP
11 7091516 2 COTTER PIN, 5/32 x 1”
12 7010821 2 INNER TUBE (For 4.10/3.50 x 4 Tire)
13 7058951 2 ASSEMBLY, Rear Tire & Rim (Includes Items 5, 14 & 15)
14 7073584 1 TIRE, 16 x 6.50-8 (Kenda)
15 7017147 1 RIM, Extra Wide (For 16/7.50 x 8 Tire)
16 7040434 1 HUB, Rear Wheel LH, 3 Hole 3/4" ID
17 7040433 1 HUB, Rear Wheel RH, 3 Hole 1" ID
18 7011035 1 AXLE BOLT, 5/16-24 x 1-5/8” Tapered (Left Hand)
19 7011201 2 NUT, Wheel Bolt 5/16-24 Hex Center Lock
20 7023522 1 CAP, Hub, L. H. (Long Axle)
21 7011013 1 WHEEL BOLT, 5/16-24 x 2” Tapered (Right Hand)
22 7023895 1 CAP, Hub
23 7012332 4 CLAMP, Right Hand (for 2” Hose)
24 7091502 6 BOLT, 1/2-20 x 3/4” Lug, GR 5
25 7031732 1 CAP, Seal RH 1.0” ID x 1.67” OD (8 & 10 HP)
26 7011817 1 SEAL, 1.22” ID x 1.875” OD
NOTE* Different size holes used, measure hole for proper fit.
To Next Page
Loading...
