EasyManua.ls Logo

Snapper GT600 Series - Maintenance

Snapper GT600 Series
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
en
TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris o tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check tire pressure
Check mower blade stopping time
Check tractor and mower for loose hardware
Every 50 Hours or Annually *
Clean battery and cables
Check tractor brakes
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or Annually *
Clean engine air lter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil lter
Annually
Replace air lter
Replace pre-cleaner
See Dealer Annually to
Inspect muer and spark arrester
Replace spark plug
Replace fuel lter
Clean engine air cooling system
* Whichever comes rst
** Check blades more often in regions with sandy soils or
high dust conditions.
* Whichever comes rst
** Clean more often in dusty conditions or when airborne
debris is present.
Maintenance Chart
Maintenance
Engine Maintenance
Refer to the engine owner’s manual for all engine mainte-
nance procedures and recommendations.
Check the Tire Pressure
Tires should be checked periodically to provide the
optimum traction and to guarantee the best cut (see
Figure 18).
NOTE: These pressures may differ slightly from the
“Maximum Inflation” stamped on the side walls of the tires.
Checking Tire Pressure.eps
Figure 18. Tire Pressure
Size Tread PSI bar
26 x 12-12 Turf 12-15 0,83-1,03
18 x 8.5-8 Turf 20-22 1,38-1,52
26 x 12-12 Field 10-12 0,69-0,83
18 x 8.5-10 Field 20-22 1,38-1,52
Not for
Reproduction

Related product manuals