Snapper HIDRO DRIVER ZTR 5900681

Not for
Reproduction
Footnotes:
Manual No.
510122524HP & 26HP HYDRO DRIVE ZTR
7
Main Frame & Front Suspension Group
Part No Descri
p
tionItem Qty
1 5025392 2 NUT, 5/16-18 HEX NYLOCK FLANGE (360Z & 365Z Models Only)
2 5025011X30 2 BOLT, 5/16-18 X 3-3/4 GD5 (360Z & 365Z Models Only)
3 5025155 4 WASHER, 5/16 SAE (360Z & 365Z Models Only)
4 5025057 6 NUT, 5/16-18 HEX NYLON LOCK (355Z Models Use Qty. 4)
5 5025011X14 2 BOLT, 5/16-18 X 1-3/4 GD5 YZ (360Z & 365Z Models Only)
6 5023213 2 SHOCK (360Z & 365Z Models Only)
7 5402816D 1 WELD, MAINFRAME, SIMPLICITY ZT (360Z & 365Z Models Only)
7 5402896D 1 WELD, MAINFRAME, SNAPPER ZT (355Z Models Only)
8 5025303 4 SCREW, 5/16-18 X 1 FLAT HD SC
9 5100930 2 PAD, FRICTION, .375 X 1.25 X 4.00
10 5025284 1 NUT, 3/4-16 HEX NYLON LOCK
11 5025160 1 WASHER, 3/4 SAE
12 5025265X56 1 BOLT, 3/4-16 X 7" YZ GD5
13 5047489 1 SPACER, .75 X 1.00 X 2.38
14 5022852 1 PIVOT BEARING, 1.00" X 1.125" OD X 1.50"
15 5100358 1 PIVOT BEARING, 1.00 X 1.125 OD X .50
16 5400756 1 SPACER, .76X 1.50 X .79
17 5023214 2 CAP, VINYL 1.687 X 1-1/2
18 5020602 2 COLLAR, 1" SPLIT
19 5020095 2 GREASE FITTING, 1/4-28 STRAIGHT
20 5048775D 2 WELD,CASTER YOKE
21 5400962D 1 WELD, PIVOTING FRONT END - ORG
22 5021541 4 BUSHING, FLANGE