Need help?Do you have a question about the Snapper LT14H331KV and is the answer not in the manual?
General| Engine Power | 14 HP |
|---|---|
| Engine Displacement | 331 cc |
| Cutting Width | 33 inches |
| Transmission | Hydrostatic |
| Number of Gears | Infinite |
| Deck Material | Steel |
| Fuel Tank Capacity | 1.5 gallons |
| Cutting Height | 1.5 - 4 inches |
| Number of Blades | 1 |
| Cutting Height Adjustment | Lever |
| Drive System | Rear-wheel drive |
| Mulching Capability | Yes |
| Grass Bag Capacity | Optional |
| Wheel Size | 16 inches |
Engine identification, exhaust, and related decals.
Components for steering and throttle operation.
Major parts of the steering mechanism.
Components of the front axle and wheel spindles.
Components for shifting transmission and controlling speed.
Pedals and pivot points for clutch/brake operation.
The main transmission unit and its supporting structure.
Rods, springs, and cams for transmission control.
Lever and mounting hardware for engaging cutting blades.
The main housing and structure of the 33" mower deck.
The main housing and structure of the 41" mower deck.
Circuitry for engine ignition and starting operation.
To Next Page