Snapper UV1621BV - Page 33

FRONT FRAME GROUP- Final Assembly
Footnotes:
TP 400-5042-2-GC-N
Manual No. 7006179TURF / TRAIL CRUISER
SERIES 1
33
Part No Descri
p
tionItem Qt
y
Note
1 7012709 2 RING, 1.00 Dia. External Retaining
2 7091714 4 BOLT, 5/16-18 x 1” Square Neck Carriage, GR5
3 7016561 2 BUSHING, 14 Ga Machine
4 7091601 4 NUT, 5/16-18 Hex Flange Lock, GR 5
5 7044680 1 WELDMENT, Grill Support
6 7058648 1 WELDMENT, Lower CVT Brake
7 7072645 2 BEARING, 1” I.D.
8 7072989 1 ROD, Lower CVT Brake (1/2-20 thread, both ends)
9 7073012 1 ROD END, Female 1/2-20
10 7073091 1 SUSPENSION GUSSET, LH
11 7073092 1 SUSPENSION GUSSET, RH
12 7073162 1 THROTTLE ANCHOR, Front (black) used on UV, UVG & UVGC
models
12 7074326 1 THROTTLE ANCHOR, Front not shown; Trailmaster version
of 7073162; used on
UVGT621BV
13 7079295 1 NUT, 1/2-20 Hex Nyloc
14 7090543 1 SCREW, 1/2-13 x 2” Hex Head Cap, GR 5
15 7090559 2 NUT, 1/2-20 Hex Jam, GR 5 or B
16 7091922 1 NUT, 1/2-13 Hex Nyloc or 7091121
17 7091541 8 SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
18 7091588 16 BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5
19 7091619 20 NUT, 3/8-16 Hex Flange Lock
20 7041033 6 NUT, 1/4” Tinnerman
21 7027198 4 BOLT, 3/8-16 x 1” Hex Flange Lock, GR 5