EasyManua.ls Logo

Snapper 7085632 User Manual

Snapper 7085632
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Safety Instructions & Operator’s Manual For
TURF CRUISER
TRAIL CRUISER
UTILITY VEHICLES
SERIES 1
UV1621BV (7085668)
UVG1621BV (7085632)
UVGT1621BV (7085903)
Thank you for buying a Turf Cruiser™/Trail Cruiser™ Utility Vehicle! Before operating your machine, read this
manual carefully and pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on Pages 2 thru 6.
Remember that all power equipment can be dangerous if used improperly. Also keep in mind that SAFETY
requires careful use in accordance with the operating instructions and common sense!
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitations and environmental factors.
† Turf Cruiser™ & Trail Cruiser™ utility vehicles are manufactured by Snapper Products Inc., McDonough, GA 30253.
MANUAL CONTENT COPYRIGHT © 2004
SNAPPER – A DIVISION OF SIMPLICITY MFG. INC.
ALL RIGHTS RESERVED
MANUAL No. 7026153 (Rev. 2, 11/11/04)
TP 100-5107-2-GC-N
UVGT1621BV shown
NOTE: Not all utility vehicle models
come with accessories shown above.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Snapper 7085632 and is the answer not in the manual?

Snapper 7085632 Specifications

General IconGeneral
BrandSnapper
Model7085632
CategoryUtility Vehicle
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

PROTECTION FOR CHILDREN

Guidelines to prevent accidents involving children.

PROTECTION AGAINST TIPOVERS

Precautions to prevent vehicle tip-overs on slopes.

CARRYING LOADS

Safe practices for loading and transporting items.

TOWING

Guidelines for safely towing trailers or attachments.

SAFE HANDLING OF GASOLINE

Procedures for safe refueling and storage of fuel.

SECTION 1 – FAMILIARIZATION

NOMENCLATURE

Identification of the vehicle's essential parts and components.

CONTROL IDENTIFICATION & SAFETY SIGNS

CONSOLE CONTROLS

Identification and function of dashboard and console controls.

DANGER - OPERATOR PROTECTIVE STRUCTURE

Critical warnings regarding the Operator Protective Structure.

SECTION 2 – OPERATING INSTRUCTIONS

PRE-START CHECK LIST

Essential checks before operating the machine.

CONTROLS – FUNCTION AND OPERATION

Detailed explanation of vehicle controls and their usage.

STARTING AND STOPPING ENGINE

Step-by-step guide for starting and stopping the engine.

STARTING AND STOPPING MACHINE MOTION

Procedures for moving the vehicle forward and backward.

USING DIFFERENTIAL LOCK

How and when to engage the differential lock for increased traction.

DRIVING THE MACHINE

General guidelines for operating the vehicle safely.

GENERAL OPERATING PROCEDURES

Best practices for safe vehicle operation in various conditions.

CARRYING LOADS

Safe practices for loading and transporting items.

TOWING

Guidelines for safely towing trailers or attachments.

TRANSPORTING MACHINE

Instructions for safely loading and transporting the vehicle.

WATER CROSSING

Warnings and precautions regarding operating the machine in water.

POWERLINK™ ON-BOARD GENERATOR SYSTEM

Operating instructions for the onboard generator system.

SECTION 3 – MAINTENANCE

SERVICE - AFTER FIRST 5 HOURS

Initial maintenance tasks to be performed after 5 hours of use.

SERVICE ENGINE AIR CLEANER

Procedure for cleaning or replacing the engine air filter.

CHECK TRANSMISSION FLUID LEVEL

How to check and maintain transmission fluid levels.

CHECK BRAKES

Procedure for inspecting and testing the brake system.

CHECK INTERLOCKS

Verifying the function of safety interlock systems.

CHECK DRIVE CLUTCH

Inspecting the drive clutch for wear and proper function.

REPLACE FUEL FILTER

Steps for replacing the fuel filter.

STORAGE (OUT OF SEASON)

Guidelines for storing the machine during off-season.

SECTION 4 – ADJUSTMENTS & REPAIRS

DRIVE BELT REPLACEMENT

Step-by-step guide for replacing the drive belt.

SERVICE BRAKE & PARK BRAKE ADJUSTMENT

How to adjust the service and parking brakes for proper function.

BATTERY REMOVAL

Procedure for safely removing the vehicle battery.

BATTERY INSTALLATION

Correct steps for installing the vehicle battery.

TRANSMISSION SHIFT ROD ADJUSTMENT

Adjusting the transmission shift rod linkage for proper gear selection.

SECTION 5 – ELECTRICAL

SCHEMATIC - WIRING DIAGRAM

Electrical wiring diagram for the vehicle.

TROUBLESHOOTING

ENGINE WILL NOT START USING ELECTRIC STARTER

Common causes and solutions for engine starting issues.

ENGINE STALLS AFTER RUNNING

Troubleshooting steps for an engine that stalls during operation.

MAINTENANCE SCHEDULE

1 YEAR LIMITED WARRANTY

DISCLAIMER OF WARRANTY

Legal disclaimer regarding warranty coverage and limitations.

PRODUCT REGISTRATION FORM

Related product manuals