What to do if air will not flow through the tube of Snapper XD SXDBL82?
If your Snapper Blower starts but air doesn't flow through the tube, the tube may be blocked. Clear the blockage to restore airflow.
Why Snapper XD SXDBL82 motor fails to start?
If your Snapper Blower motor fails to start when you depress the switch trigger, there are a couple of potential reasons. First, ensure that the battery is fully secured in the blower. Second, the battery may not be charged. In this case, charge the battery pack according to the instructions included with your model.
To Next Page
General
