Snappy Chef SCD003 - Troubleshooting Error Codes; Common Error Codes and Solutions

9
TROUBLE SHOOTING
Error Codes
Problem
E0
No cookware / Incorrect cookware.
Ensure your cookware is compatible with induction appliances.
If problem persists, contact your nearest Service Centre.
E1
Supply Voltage is too high.
Switch off power at the plug point to cease electrical connection. Use a
different plug point when trying to use the unit for a second time.
If problem persists, contact your nearest Service Centre.
E2
Supply Voltage is too low.
Switch off power at the plug point to cease electrical connection. Use a
different plug point when trying to use the unit for a second time.
If problem persists, contact your nearest Service Centre.
E3
Overheating- cooking vessel might have boiled dry.
Switch appliance off, and allow to cool down, add moisture to cooking vessel,
and continue cooking.
If problem persists, contact your nearest Service Centre.
E4
Thermostat is damaged.
Contact your nearest Service Centre.
E5
Overheating- general appliance overheating.
Switch appliance off, and allow to cool down.
If problem persists, contact your nearest Service Centre.
E6
Radiator is damaged.
Contact your nearest Service Centre.
E7
Overheating- general appliance overheating.
The temperature of the cookware has exceeded 270°C. Switch appliance off,
and allow to cool down.
If problem persists, contact your nearest Service Centre.