7
• After selecting the relevant cooking zone, use the UP/DOWN buttons to increase or
decrease the heat setting.
• To switch between cooking zones, touch the relevant button, and proceed to adjust
the heat setting. While adjustable, the LCD display of the relevant cooking zone will
flash.
• The timer can be used to set your cooking time.
Select the relevant cooking zone, and touch the timer button. Increase the time
by touching the UP/DOWN buttons. Time can be set in intervals of 1 min, up to
99 minutes. The stove will automatically set after 3 seconds of selection.
The countdown will flash every 5 seconds.
To clear the timer, select the relevant cooking zone, and touch the
timer button again.
• Use the lock function to ensure no settings are accidentally adjusted
by curious fingers.
Touch and hold the lock button until it makes a beep sound. All buttons should
now be locked, and will not respond to touch.
To unlock, press button again until beep, and either switch off, or select the
relevant cooking zone to make adjustments.
VERY IMPORTANT
• While the cooking zones might be switched off by double tapping the
relevant cooking zone button, this does not switch the unit off, the
unit only enters stand-by mode.
• Ensure the unit is off by touching the ON/OFF button, after which the LCD display
and power light will start flashing to indicate that the unit is now off.
To Next Page
Loading...