• Please unplug the appliance or disconnect the power before
performing any cleaning, maintenance, or servicing.
• If the appliance cord is damaged, it must be replaced by SnoMaster,
its approved agent, or a similarly qualified person to prevent
any hazard.
• Unless specifically recommended in this manual, do not attempt to
repair or replace any part of the appliance. All other servicing should
be referred to a qualified technician.
• Never clean appliance parts with flammable fluids as they may create
a fire hazard or explosion. Also, avoid storing or using petroleum or
other flammable vapours and liquids near this appliance.
• Avoid solvent-based cleaning detergents or abrasives on the interior
or exterior as they may damage or discolour it.
• Cleaning and maintenance should be supervised by adults, especially
if children are involved.
• The exterior of the appliance should not be exposed to water.
• Do not store explosive substances such as aerosol cans with a
flammable propellant in this appliance.
• Ensure all packaging materials, stickers, and films are removed from
the appliance. Clean the appliance surfaces with a mild detergent and
a damp cloth before initial use.
• Before connecting the appliance to a power source, let it stand
upright for approximately 12 hours. This measure helps minimise the
risk of a cooling-system malfunction that might occur due to
handling during incorrect transportation.
• Ensure all electrical connections are clean and dry before switching
on the appliance.
• Ensure all parts are correctly assembled before operation.
03
This appliance contains R134a refrigerant, which is
FLAMMABLE and may cause a fire or an explosion.
To Next Page