• To ensure optimal performance and reduced operational noise,
position the appliance on a level, sturdy surface. If utilising a fridge
slide or built-in fixture, verify its robustness to bear the appliance's
weight when fully loaded.
• Caution: Installing the appliance on carpeting may lead to
discoloration due to heat emission from the compressor.
• Ensure adequate air circulation for the appliance by maintaining a
clearance of at least 150mm on all sides.
• When transporting the appliance, avoid tilting it beyond a
45-degree angle from its upright position.
• Avoid areas where the appliance might be exposed to direct
sunlight, any sources of heat (stove, heater, radiator, etc.),
extremely hot ambient temperatures or excessive moisture.
05
Verify that the appliance includes all the accessories listed below:
ACCESSORIES INCLUDED
1 x 220V AC
POWER CABLE
1 x 12V/24V DC
POWER CABLE 16 x SCREWS
FOR HANDLE ASSEMBLY
2 x CARRY
HANDLES
1 x POWER
ADAPTER
To Next Page