GENERAL INFORMATION
FRONT_PAGE_A38E_AUG2018 1-1
INTRODUCTION & SPECIFICATION 1-2
MACHINE PREPARATION 1-3
REPAIR PARTS
FINAL ASSEMBLY 2-1
CHASSIS ASSEMBLY A38E 2-2
PG PART ASSEMBLY, A38E 2-3
BOOMS & POSTS ASSEMBLY 2-4
CAGE HYDRAULIC ROTATOR ASSEMBLY 2-5
WHEEL HUB ASSEMBLY 2-6
DRIVE REDUCTION GEARBOX ASSEMBLY 2-7
TRACTION MOTOR ASSEMBLY -- SERIAL BREAK: (SN:006001 - 006204 / 006800 - Current) 2-8
REAR & FRONT WHEEL KIT (NON MARKING) 2-9
SLEW MOTOR, WORM DRIVE UNIT & SLEW BEARING ASSEMBLY 2-10
DECAL KIT ENGLISH (ANSI) 2-11
DECAL KIT INTERNATIONAL (CE) 2-12
CONTACT SNORKEL 2-13
HYDRAULICS
HOSE KIT 3-1
HOSE KIT ADDITIONAL 3-2
LOWER LIFT CYLINDER 3-3
UPPER LIFT CYLINDER ASSEMBLY 3-4
TELESCOPIC CYLINDER ASSEMBLY 3-5
STEERING CYLINDER ASSEMBLY 3-6
MASTER/SLAVE CYLINDER ASSEMBLY 3-7
PLATFORM ROTATE CYLINDER ASSEMBLY 3-8
MOTOR/PUMP ASSEMBLY 3-9
MANIFOLD BLOCK ASSEMBLY (Hydraulic Platform Rotate) 3-10
ELECTRICAL
A38E LOWER CONTROL BOX ASSEMBLY (CE/ASSY) (Harnesses are not part of this assembly) 4-1
UPPER CONTROL BOX ASSEMBLY ANSI/CE (Hydraulic Platform Rotate) 4-2
CABLES & ELECTRICAL COMPONENT LEGEND 4-3
OPTIONS
OPTION LIST 5-1
OPTION SNORKEL GUARD 5-2
ADDITIONAL OPTIONS, A38E 5-3
MAINTENANCE
A38E_MAINTENANCE 6-1
TROUBLESHOOTING 6-2
SCHEMATICS
To Next Page
Loading...
