Snorkel ATB 50 - User Manual

Questions and Answers

D
danielle26Aug 12, 2025
How to start a Snorkel Boom Lifts if the engine won't start from the ground control box?
- A
  Angela HernandezAug 12, 2025
  If your Snorkel Boom Lift engine won't start from the ground control box, it might be due to incorrect switch settings. Ensure the Battery switch is ON. At the ground control box: Set the Master Key Switch to ON. Pull the Emergency Stop switch (out) ON. Set the Platform/Ground Selector switch to GROUND. Set the Master Key Switch to ON for 5 seconds, then turn the Master Key Switch to START.
J
Joshua MooreAug 16, 2025
How to start a Snorkel ATB 50 Boom Lifts if the engine won't start from the platform control box?
- S
  Sherry RiceAug 16, 2025
  If your Snorkel Boom Lift engine won't start from the platform control box, it might be due to incorrect switch settings. Ensure the Battery switch is ON. At the ground control box: Set the Master Key Switch to ON. Pull the Emergency Stop switch (out) ON. Set the Platform/Ground Selector switch to PLATFORM. At the platform control box: Set the Anti-Restart switch to OFF. Pull the Emergency Stop switch (out) ON. Turn the Anti-Restart switch to ON. Turn the Anti-Restart switch to START.
N
Natalie DavisAug 20, 2025
What to do if Snorkel Boom Lifts engine won't start from the ground control box because the main circuit breaker has tripped?
- K
  Kelly WhiteAug 20, 2025
  If your Snorkel Boom Lift engine won't start from the ground control box and the main circuit breaker in the ground control box has tripped, wait three minutes, then try to start the engine. If it still won't start, refer the problem to a qualified service technician.
S
Sarah KlineAug 23, 2025
What to do if Snorkel ATB 50 engine won't start from the platform control box because the main circuit breaker has tripped?
- A
  Arthur MillerAug 23, 2025
  If your Snorkel Boom Lift engine won't start from the platform control box because the main circuit breaker in the platform or ground control box has tripped, wait three minutes, then try to start the engine. If the engine still won't start, refer the problem to a qualified service technician.
S
Shelia BellAug 27, 2025
What to do if Snorkel ATB 50 engine cranks but won't start from the ground control box due to lack of fuel?
- K
  kroseAug 27, 2025
  If your Snorkel Boom Lift engine cranks but won't start from the ground control box, it might be out of fuel. Add fuel to the tank, then alternately crank the engine for 20 seconds and let the starter motor cool for 60 seconds (20 on / 60 off).
O
Oscar HortonAug 31, 2025
What to do if Snorkel ATB 50 engine cranks but won't start from the platform control box due to lack of fuel?
- J
  jeremy75Aug 31, 2025
  If your Snorkel Boom Lift engine cranks but won't start from the platform control box, it might be out of fuel. Add fuel to the tank, then alternately crank the engine for 20 seconds and let the starter motor cool for 60 seconds (20 on / 60 off).
S
Susan BurgessSep 3, 2025
Why Snorkel ATB 50 Boom Lifts engine cranks but won't start from the ground control box with LPG?
- B
  Brandon KennedySep 3, 2025
  If your Snorkel Boom Lift engine cranks but won't start from the ground control box, and you're using LPG, the Dual Fuel switch on the platform control box might be set incorrectly. Set the Dual Fuel switch in the platform control box to GAS or LPG. Check the fuel gauge on top of the tank to see if there is fuel. For LPG operation: Check that the fuel valve on top of the LPG tank is open. Alternately crank the engine for 20 seconds, then let the starter motor cool for 60 seconds.
S
Steven HawkinsSep 7, 2025
Why Snorkel Boom Lifts engine cranks but won't start from the platform control box with LPG?
- S
  Sheryl DiazSep 7, 2025
  If your Snorkel Boom Lift engine cranks but won't start from the platform control box, and you're using LPG, the Dual Fuel switch on the platform control box might be set incorrectly. Set the Dual Fuel switch at the platform control box to GAS or LPG. Check the fuel gauge on top of the tank to see if there is fuel in the tank. For LPG operation: Check to see that the fuel valve on top of the LPG tank is open. Alternately crank the engine for 20 seconds, then let the starter motor cool for 60 seconds.