Need help?Do you have a question about the Snorkel SL26RTE and is the answer not in the manual?
General| Weight | 5, 952 lb (2, 700 kg) |
|---|---|
| Overall Width | 4 ft (1.22 m) |
| Overall Length | 12 ft 4 in (3.8 m) |
| Horizontal Reach | 9 ft 1 in (2.8 m) |
| Platform Capacity | 500 lb (227 kg) |
| Fuel Type | Diesel |
Explains the manual's objective for providing service and parts information.
Details manual's coverage: operation, maintenance, adjustment, repair, schedules, troubleshooting.
Describes the main components: platform, controller, elevating assembly, etc.
Details the platform's construction, including guardrails, toe boards, and entry gate.
Locates and describes the function of the platform's control panel.
Explains how the platform is raised and lowered by the hydraulic system.
Describes the chassis as the structural frame supporting all components.
States the objective and operational limits of the work platform.
Provides an illustration and parts list for the SL30RTE general assembly.
Illustrates and lists parts for the SL26RTE general assembly.
Details the hydraulic hose assembly with a schematic and parts list.
Shows a schematic and parts list for the chassis assembly.
Illustrates and lists parts for the lower control panel assembly (CE version).
Provides illustrations and parts for steer, axle float, and tilt cylinders.
Shows a schematic and parts list for the control module assembly.
Illustrates and lists components for the control cabinet assembly.
Details the diesel fuel tank assembly with a schematic and parts list.
Shows schematics for the hydraulic valve block movement assembly.
Provides schematics for the hydraulic valve block drive assembly.
Illustrates the hydraulic oil tank assembly and its components.
Shows a schematic and parts list for the SL26SL elevating assembly.
Illustrates and lists parts for the SL30SL elevating assembly.
Details the main lift hydraulic cylinder assembly with a schematic and parts.
Shows a schematic and parts list for the SL30SL platform assembly.
Illustrates and lists parts for the SL26SL platform assembly.
Provides a schematic and parts list for the slide-out section of the platform.
Shows a schematic and parts for the upper control panel (CE version).
Details parts for the SL30 upper control panel additions.
Details parts for the SL26 upper control panel additions.
Lists the decal kit components for the SL26RTE model in English.
Lists the decal kit components for the SL30RTE model in English.
Provides an overview of the service and repair section and its purpose.
Lists specialized tools required for maintenance and repair procedures.
Describes the importance and schedule of regular inspections and checks.
A detailed checklist for periodic maintenance tasks and their intervals.
Instructions on how to safely block the elevating assembly during maintenance.
Procedure for charging and maintaining the machine's batteries.
Guidelines for lubricating key components of the machine.
Covers hydraulic system components and maintenance.
Procedure for adjusting the main relief valve pressure.
Procedure for adjusting the lift relief valve pressure.
Procedure for adjusting tilt and steering relief valve pressure.
Instructions for removing, disassembling, cleaning, and assembling the hydraulic manifold.
Covers pump removal and installation procedures.
Discusses maintenance of hydraulic brakes, drive motors, and hubs.
Covers removal and installation of the axle cylinder.
Details for steering cylinder removal and adjustment.
Steps for removing the lift cylinder.
Instructions for manually leveling the platform using controls.
Identifies and explains the function of platform control panel elements.
Procedure for calibrating the machine's level sensors.
Steps to recalibrate the platform's height measurement system.
Procedure for calibrating the platform's load sensing system.
Provides torque values for hydraulic components and fasteners.
Overview of the troubleshooting section and its purpose.
General steps and guidelines for troubleshooting machine issues.
A systematic approach to diagnosing and resolving problems.
Lists specialized tools for troubleshooting.
Procedures for adjusting hydraulic settings when components are repaired.
Steps to check hydraulic pump pressures using a gauge.
Lists common troubles, probable causes, and remedies.
Explains how to access and use diagnostic tools via the EZcal display.
Lists and explains fault codes related to the battery and motor systems.
The first part of the electrical schematic diagram for CE models.
The second part of the electrical schematic, detailing cable harnesses.
Electrical schematic showing cable harnesses for a different configuration.
Information and parts for the optional removable upper control box.
Details and parts for the optional tow hitch.
To Next Page
