Need help?Do you have a question about the Snorkel TL37 and is the answer not in the manual?
General| Weight | 9, 480 lbs |
|---|---|
| Power Source | Diesel |
| Model | TL37 |
| Category | Lifting Systems |
| Fuel Type | Diesel |
| Max Working Height | 13.2 m |
| Max Platform Height | 11.2 m |
| Max Load Capacity | 215 kg |
| Horizontal Reach | 6.1 m |
| Platform Size | 1.83 m x 0.76 m |
| Working Height | 13.2 m |
| Platform Height | 11.2 m |
| Overall Width | 1.75 m |
| Overall Length | 5.79 m |
| Stowed Height | 2.21 m |
| Platform Capacity | 215 kg |
Details the standard features and design of the aerial platform.
Explains the meaning of Danger, Warning, and Caution symbols for safety.
Outlines safe operating practices, training, and operator responsibilities.
Covers general maintenance requirements and qualified personnel for repairs.
Identifies main parts of the aerial platform using diagrams.
Lists key technical data including dimensions, weight, and operating parameters.
Illustrates the machine's safe working area and reach limits.
Warns about the non-insulated nature of the platform and electrical dangers.
Details required safe distances from electrical conductors.
Covers risks of instability, tip-overs, and safe operation on surfaces.
Addresses hazards associated with batteries, charging, and high-pressure fluid.
Details the function and location of emergency stop buttons.
Explains the control mode switch and outrigger stability lights.
Covers manual lowering and slewing procedures during emergencies.
Explains hand pump operation and the guardrail system.
Describes the LED indicators on the battery charger.
Explains the LCD display for operating time and battery power.
Provides guidelines for keeping batteries clean and safe.
Details the procedure for charging the aerial platform batteries.
Describes the location and function of controls at ground level.
Mentions controls located on the platform.
Covers checking batteries, terminals, fluid levels, and connections.
Details inspection of fluid level, hoses, tubes, and fittings.
Outlines testing of lower and upper controls and emergency functions.
Covers inspection of weldments, fasteners, guardrails, and decals.
Lists essential steps before operating the aerial platform.
Explains operation using ground and platform controls.
Advises on platform entry and accessing compartment trays.
Details steps for properly stowing the platform at the end of use.
Covers securing the machine on a vehicle and transport safety.
Explains towing guidelines and the friction drive assist package.
Covers manual slewing and lowering via valves during emergencies.
Details the procedure for emergency lowering using a hand pump.
Provides a chart to diagnose and resolve common operational problems.
Defines key terms and concepts related to the aerial platform.
To Next Page
