EasyManua.ls Logo

Snugpack STRATOSPHERE User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
First unroll the shelter and locate the pole bag and separate the poles, clip the sections together to
make a continuous pole, the poles are held together by elastic to help. There are two channels at
the head of the shelter with two colour coded pole sleeves, once the poles are loosely inserted put
the end of the green pole into the eyelet with the corresponding colour tab on the webbing strap.
Then put the black pole into the remaining strap.
Apply pressure to the end of the pole and pass through the sleeve forcing the other end of the
green pole into the remaining green eyelet. Then repeat for the last black pole end into the nal
eyelet.
Insert both poles rst (before applying pressure) put them into the outer most holes rst to minimise
pressure. The shelter and poles react differently at different temperatures if the canopy is not tight
enough you can then select the other hole to improve tension.
The tension just needs to be enough so water channels off the top of the hood.
You can seriously damage the unit if the poles are inserted incorrectly as it can tear out the stress
points and breech the waterproof sealing.
Eyelet holes are not for the stakes (which will not t!) the stakes go through the loops placed around
the shelter.
1. POLES
SET UP INSTRUCTIONS STRATOSPHERE
One person shelter designed to keep out the worst of the elements
The temptation is as it’s self-supporting is not to peg it out, but the shelter really benets from being
put under tension. Use all 7 pegs if you can to ensure that the fabric is pulled as tight as possible. The
peg at the back is most important as this allows for ventilation, some airow is required to help with
venting (and also breathing) the fabric is moisture permeable but will not allow air to pass through it.
2. PEG OUT
1
2
Unlike a conventional tent there is a possibility of water pooling if there is not enough denition in
the shape of the shelter. If water builds up and then channels off it can overwhelm the zip ap system
3. POOLING
3
Photography:
Outdoor Aesthetics Pascal Rohé
mail@outdooraesthetics.org
Question and Answer IconNeed help?

Do you have a question about the Snugpack STRATOSPHERE and is the answer not in the manual?

Snugpack STRATOSPHERE Specifications

General IconGeneral
Capacity1 person
Doors1
VentilationMesh panels
TypeBackpacking Tent
Weight1.13 kg
Season3 season
Inner MaterialNylon Rip Stop
PolesAluminium
WaterproofYes, 5000 mm HH
Outer Material50D Nylon Rip Stop with a 5000mm Waterproof PU Coating

Summary

POLES Setup Guide

PEG OUT Instructions

Understanding Water Pooling

ZIP FLAP Sealing

Managing Condensation

VENTING for Airflow

Preventing Overheating

Shelter Take Down Procedure