Snugpak Journey Quad User Manual

JOURNEY QUAD
FOUR PERSON TENT
Assembly Instructions
x1 Large Orange
Tip
x2 Silver Tip
x20 Alloy Stakes
Lay the footprint down before
erecting the tent.
First unroll the outer shelter
and locate the pole bag and
separate the poles, clip the
sections together to make a
continuous pole, the poles are
held together by elastic to help.
Pole Placement
1. Insert the Silver Tip Pole
with Silver section to
Silver trim edging.
2. Insert the other Silver Tip
Pole with Silver section to
Silver trim edging.
3. Insert the Large Orange Tip
Pole with Silver section to
Silver trim edging.
2
3
1
4. Insert the tent pole ends
into the grommets in the
corresponding webbing
straps.
5. Once all the pole ends are
inserted into the grommets
then take the Ultralight
Alloy Stakes that came
with the Journey Quad and
stake down the corners and
the webbing straps with
grommets. Add additional
stakes to other stake
points as needed.
4
5

Snugpak Journey Quad Specifications

General

Type	Tunnel Tent
Capacity	4 Person
Seasons	3 Season
Doors	2
Ventilation	Multiple Vents
Material	Polyester
Waterproof Rating	5000mm HH
Inner Tent	190t Polyester
Groundsheet	210T Polyester
Poles	Aluminium

Summary

Journey Quad Tent Assembly Instructions

Tent Components and Pole Preparation

Identifies tent poles and stakes, and describes initial shelter and pole preparation.

Pole Placement and Tent Framing

Guides the insertion of tent poles into the structure's edging.

Staking the Tent Base

Instructs on securing the tent corners and webbing straps with stakes.

Connecting Inner Tent to Flysheet

Details connecting the inner tent to the flysheet using toggles, rings, and buckles.

Final Tent Setup and Stabilization

Covers accessing the tent interior and stabilizing it with guy lines in windy conditions.