Snuza GO! User Manual

3
Ensure that Go! sits squarely on the nappy,
and that the Movement Sensor (1) is in contact
with baby’s tummy.
Press the ON/OFF switch (5) to start
monitoring.
Always follow the above procedure to ensure
that your baby’s abdominal movement is being
monitored, and to prevent false alarms caused
by lack of contact with the baby’s tummy.
NOTE: Handle Go! with care to prevent damage
to clip or sensor.
ENGLISH

Snuza GO! Specifications

General

Brand	Snuza
Model	GO!
Category	Baby Monitor
Language	English