Breathing
Movement
Monitoring
Skin
Temperature
Body
Position
Sleep
Analytics
Snuza Connect
Step 1 | Charge before use
Step 2 | Register yourself as a user
Step 3 | Add a Pico to your account
Step 4 | Attach your Pico
NAPPY
SKIN
You may have to charge your Pico before you can use it for the first time. To do this, attach the
provided micro USB power cord to the charging cradle base. A red light will appear on the charging
cradle base to indicate it has power. Open the charging cradle lid and place your Pico in the correct
position. Close the lid. The battery light on the Pico will flash while charging and turn solid green
when fully charged.
For babies, fold the top edge of the diaper over to ensure the Pico fits snuggly.
• Lift the top lever to release the clip. (fig. 1)
• Slide the Pico onto the waistband of your child's pants or baby's diaper, placing fingers between
the clip and skin to ensure that the skin does not get pinched between the clip and
clothing/diaper. A baby's skin is especially supple and this can happen quite easily (fig. 2).
• Close the lever to secure the Pico into place (fig. 3) Double-check to ensure that no skin is caught
in the clip.
Download the Snuza Connect app on your phone and open it. Register yourself as a user by following
the prompts. An email will be sent to you for authentication during this process. Click on the activation
link in the email. Once authenticated, you can add one or more Pico's to your account.
Add a Pico by tapping 'Add New Device' on the 'Registered Picos' screen and complete all fields.
You can find the serial number on the side of the Pico by lifting the top lever of the Pico.
Optional: Once added, you can share the Pico with other registered users.
fig. 1 fig. 2 fig. 3
To Next Page
Loading...
Need help?
General
