3
ST-680 OPERATION INSTRUCTIONS
1. Features introductions
★ When connecting with computer, it can be used for data inquiry and function setting
simultaneously. (Door open/close, start alarm system, etc). It can also operate solely to
manage access control.
★ Function setting can be done by computer or reader itself. (Single registration or deletion,
door open time, etc).
★
The capacity data input/output can reach up to 6,000 by single reader operation. When
linking with computer, its data input/output capacity can be unlimited.
★
Main reader has 9,000 card registrations capability. Each card can be self-setting for
personal password and effective in/out time.
★
Main reader has 48 units of time zone. Each time zone unit also has 5 time ranges for
self-setting by user.
Example: It can be set from “G” hour “H” minute to “I” hour “J” minute on every
Mondays, Wednesdays, Saturdays in periodic of “A” year “B” month “C” day
to “D” year “E” month “F” day as effective in/out time range.
★ Directly link to series type printer for direct data printing.
★ Additional sub-reader for in/out control.
★ Equipped with hardware self-testing function
★ Internal batteries will provide power supply when power cut occurred to prevent any data
from being erased and system time can operate as normal.
★ Main reader access control’s range:
* Card number -It must be registered before use.
* Password -Personal password has to key in to open the door.
* Time zone -Setting the effective of year, month, day, time range, Monday ~
Sunday
* Special holidays -User could set any holidays as to prevent any unauthorized access.
* Error control -Alarm will activate when “N” times of consecutive error password
entering occurred.
* Anti-pass -The card could only be used for matching single entry and exit.
(Otherwise, it will be considered the card has been duplicated causing
access denial.)
★
Main reader’s sensing range:
* Anti-tamper - when the reader is tampered, alarm will be activated.
* Anti-theft - Alarm will be activated when sensing any abnormal operations.
* Illegal door open - Alarm will be activated when door is destroyed and opened by force.
To Next Page
Loading...