EasyManua.ls Logo

Socket CSA-1 - Mechanical Specifications; Dimensions; Weight; Housing Material

Socket CSA-1
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cordless Serial Adapter User Guide
September 22, 2003 Copyright © 2003, Socket Communications, Inc. Page 5
Document#: 6410-00000 A CONFIDENTIAL Revision 0.9
5 Mechanical Specifications
5.1 Dimensions
Length 65mm
Width 35mm
Height 17mm
5.2 Weight
25 grams
5.3 Housing Material
ABS and Polycarbonate (50/50) combination material.
5.4 Physical Connectors
External Power, AC In, uses same power supply as BT GPS
9 pin male connector, DTE
Thumb screws
6 Environmental Requirements
6.1 Temperature/Humidity
Operating temperature range: -20º to 85º C
Humidity: 5% to 95% (non-condensing)
Storage temperature range: -40º to 95º C
6.2 Shock
Unit Mechanical Shock: The unit will function properly after 30 drops of 1 meter to a concrete
floor at 23 C, consisting of 5 drops to each of the following surfaces: Top, bottom, both sides,
nose and the contact end of the unit. Physical repair is allowed only to the connector area for
proper insertion into a DB9 connector.
Conditions: No degradation of functional performance.
No loose internal components.