EasyManuals Logo

SoClean SC1200 User Manual

SoClean SC1200
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
your CPAP. If you do put it below your CPAP unit, we ask that you
periodically look at the check valve assembly to make sure there is no
water in the clear tube, as this can harm you SoClean unit. If you do
see water, you should replace the check valve assembly.
Q: Isn’t the small tube under water during cleaning? Or is the
reservoir supposed to be dry during cleaning?
A: If you have water in your reservoir, the tube needs to be
submerged. In order to get the activated oxygen to clean the water.
However, you can also run the SoClean without water in the reservoir.
Q: Does the small hose that goes into the water chamber affect
my CPAP air pressure or act like a leak?
A: The small hose would have a minimal effect if any on your CPAP
machine air pressure. In rare cases, if you have a BI-PAP or A-PAP
machine, a heated hose adapter may be required to ensure proper
pressure. The small hose does not act like a leak.
Q: How long will the SoClean machine last?
A: We warranty the SoClean for two years. However, in manufacturer
testing we simulated running the machine for over 5 years and
experienced no issues.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SoClean SC1200 and is the answer not in the manual?

SoClean SC1200 Specifications

General IconGeneral
BrandSoClean
ModelSC1200
CategoryAccessories
LanguageEnglish

Related product manuals