socomec DIRIS Ap User Manual

8 SOCOMEC - Réf. : 875 518 B-GB
PROGRAMMING OF THE N° 1 ANALOG OUTPUT VALUE AT 20 mA (OUt 1 20 MA HV)4
NB: The type default setting is 0 mA (HV 0000). If you want this setting, press ▼. You will pass to type programming
(OUt 2 20 MA TYPE). If not, proceed as follows:
KEYS INSTRUCTIONS DISPLAY COMMENT
Press once
Press as many times as necessary to
move to the right or onto move to
the left.
Press ▼ to decrement or on ▲ to increment selected digit value.
Press once to confirm value.
Press once ▼ to pass to analog output 2 type programming (OUt 1 20 MA TYPE).
NB: the first four digits correspond to the value in decimals and the sixth digit to the weight /, K (kilo) or M (Mega).
KEYS INSTRUCTIONS DISPLAY COMMENT
Press once
To display flashing 1
st
digit.
Press once
To increment the 1
st
digit
Press four times
To display flashing 5
th
digit.
Press once
NB: for ΣP, ΣQ, ΣS and ΣPF the upper threshold (HV) may correspond to the positive value (example : + 1000 kW).
Press again for : M, / and K
Press once
To confirm value.
Press ▼ to programme analog output
2 type (OUt 2 20 MA TYPE).
Example: programming of 2000 M once entered in the Out 1 20 mA HV

socomec DIRIS Ap Specifications

General

Brand	socomec
Model	DIRIS Ap
Category	I/O Systems
Language	English