socomec DIRIS Ap - User Manual

DIRIS Ap
Out 0/4 – 20 mA
Industrial Switching & Protection Systems

Summary

Preliminary Operations

General Information

Functions

Provides 2 configurable 0/4-20 mA analog outputs, supporting up to 4 outputs across 2 modules.

Installation

Connection

Safety instruction: The DIRIS Ap must be switched off before connecting the module.

Programming

Programming the N° 1 Analog Output Type

Configures the output type (4-20 mA or 0-20 mA) for the first analog output.

Programming of the N° 1 Analog Output Allocation

Assigns the input source (e.g., I1, U12) for the first analog output.

Programming of the N° 1 Analog Output Value at 0 or 4 mA

Sets the low-level value (0 mA or 4 mA) and units for the first analog output.

Programming of the N° 1 Analog Output Value at 20 mA

Sets the high-level value (20 mA) and units for the first analog output.

Programming of N° 2 Analog Output

Instructions for programming the type of the second analog output.

Programming of N° 3 Analog Output

Instructions for programming the type of the third analog output.

Programming of N° 4 Analog Output

Instructions for programming the type of the fourth analog output.

Technical Characteristics

Analog Outputs

Specifications include load resistance, response time, galvanic insulation, and accuracy.

socomec DIRIS Ap Specifications