Need help?Do you have a question about the socomec DIRIS G-50 and is the answer not in the manual?
General| Type | Gateway |
|---|---|
| Display | LCD |
| Ethernet ports | 1 |
| RS485 ports | 1 |
| Data logging | Yes |
| Web server | Yes |
| Alarm management | Yes |
| Relative humidity | 5 to 95% non-condensing |
| Communication Protocols | Modbus TCP, Modbus RTU |
| Input Voltage Range | 100-240 VAC |
| Operating temperature | -10°C to +55°C |
| Storage temperature | +70°C |
| Standards | IEC 61010-1 |
Safety warning about electrical hazards and potential explosions during operation.
Precautions to prevent damage to the gateway from improper installation or voltage.
Lists the various functions performed by DIRIS G gateways.
Refers to safety instructions for assembly and installation procedures.
Details how to mount the DIRIS G gateway.
Step-by-step guide for mounting the gateway on a DIN rail.
Instructions for mounting the gateway onto a base plate.
Visual guide for attaching an optional module directly to the gateway.
Details connection points for power, USB, RS485, and Ethernet on the DIRIS G.
Explains how to connect various optional modules (DIRIS O-iod, O-ioa, O-it).
Describes the function and status of the LEDs on the DIRIS G gateway.
Explains the auto-addressing mode for products connected to the gateway.
Overview of communication methods (RS485, RF) used by DIRIS G gateways.
Overview of configuring the gateway using the Easy Config software.
To Next Page
