3 Transportation and installation
The personnel in charge of transportation and installation of the
equipment must be acquainted with the following instructions.
Pay careful attention to the weight of the hammer.
3.1 Transport
Always move with care: each inappropriate movement can be very
dangerous.
Do not pass or stop under the hammer when it is lifted up.
Check in the technical specifications, the
t
otal weight of the hammer, that is together
with the adpating plate and the tool already
mounted.
In order to move the hammer safely, when
it is not coupled to the excavator, it is
necessary to have a suitable and safe
lifting system (as showed in the picture on
the right).
Always use means of transport and lifting,
suitable to the weight of the hammer.
To Next Page
Loading...
Need help?
General
