socomec DMS 210 User Manual

!
!
This manual is reserved by law and it is formally forbidden to reproduce or to give to any
third part without explicit authorization by
SOCOMEC S.p.A.
The equipment can be modified so that some details can be different from those shown
herein; nevertheless this cannot be prejudicial for the texts of the following instructions.
The Instruction manual is an integral part of the machine so it must always accompany the
machine until its demolition.
For each demolition always refer to the instructions.
Follow all the instructions in this manual very carefully.
The operators with lack of knowledge of instructions must be prevented from using the
machine.
Instructions msu be kept complete and readable in accessible location for operators.
This manual is to be given to any other user or following owner of the equipment.
This equipment can’t be put in service if the carrier machine is not declared conform to the
CE no. 2006/42 directive.
MANUFACTURER
Socomec S.p.A.
St
rada Ferrari, 38
43014 Medesano (PR) - Italy
Phone +39-0525-420929 Fax +39-0525-420375
Socomec S.p.A. is not responsible for any inconvenience, breaking, accident and so on, due to lack of
knowledge or to the non-observance of the information given by this manual service.
The same is valid for all those modifications, changes and/or installations of attachments not previously
authorized.
Nederland B.V.

socomec DMS 210 Specifications

General

Brand	socomec
Model	DMS 210
Category	Power Tool
Language	English