socomec DMS 95/2 - DMS 95;2 Specifications

2.2 Technical features DMS 95/2
Technical features
Unit of
measurement
Value
Energy per stroke J
240
Maximum frequency s/min
1200
Maximum oil flow l/min
27 - 40
Maximum working pressure bar
120
Maximum exhaust back pressure bar
20 - 30
Accumulator charging pressure bar
45
Calibration pressure of the hydraulic system maximum valve bar
180
Hammer weight in working conditions Kg
95
Tool weight Kg
6
Pin retainer tool weight Kg
0,38
Pressure line pipe diameter (EN 856 - 4SP) G
1/2 “
Return line pipe diameter (EN 853 - 2SN) G
1/2 “
Tool diameter mm
45
Hammer height with tool without adapting plate mm
1000
Maximum length of the tool inner guide (L) mm
145
Maximum diameter in front and back the tool bushings mm
48
Maximum oil temperature in the tank °C
80
Maximum absorbed power Kw
7
Excavator weight t
1.2 - 1.8
TECHNICAL FEATURES
8
Page
of
32
2
Nederland B.V.