SodaStream DUO - Quick Connect CO₂ Cylinder Setup; Step 1: Remove Seal and Cap; Step 2: Open Back Cover; Step 3: Raise Cylinder Handle

6
*Make sure the carbonation bottle is not installed in the Sparkling Water Maker before
inserting the cylinder.
Raise the pink
cylinder handle
3
FOR A SIMPLE
SET UP VIDEO -
SCAN AND WATCH
QUICK CONNECT
CO2
CYLINDER
Pull open the
back cover
1
2
Remove the seal
and pull off the cap
Please carefully read the full SET UP
instructions
and safety warnings on p.17 and 19-20