of
www.soehnle-professional.com
1.1.2 Multifunction scale, verifiable 7708
The multifunctional scales / invalid chair scales are used for weighting people sat down or
standing.
2. FUNCTIONS
2.1 Setting up the scales and start-up
For design reasons, these scales should be used only on level floors. If the set-up location is
in Germany, the flatness requirement is met if the floor is within the tolerances for screeded
floors defined in DIN 18202, Table 3, Row 4. For other countries, please refer to the
relevant national standards. If desired the scales can be adjusted with the help of the
supplied underlay plates.
Connect the power adapter to the scales.
Ensure that there is clear access to the power socket.
Before the initial start-up of the scales, the battery must first be charged for 5 hours!
During charging a blue control light flashes in the housing (this control light is found on the
side of 3710 and on the back of 3705). As soon as the battery has finished charging the LED
stops.
Display and operating terminal
3705 or 3710
Weighing platform
Support rails
To Next Page
Loading...
