Specifications
Emitter: A powerful and high-efficiency LED with a lifespan of 50,000 hours
Operating voltage: 3V – 4.2V
Battery options: 1x 21700 rechargeable lithium-ion battery
Size: 32 mm × 30 mm × 112.8 mm
Weight: 168 grams
Bike light body: A6061-T6 aluminum alloy.
Water resistance i.a.w. IP65
Standby Current:
≤
100uA.
Charging specification: 5V/3A
Cut-off line: The design of the cut-off line prevents the light from
shining into the eyes of oncoming pedestrians, cyclists, or motorists, and
helps reduce the risk of accidents caused by glare.
Battery Specification
Rechargeable lithium-ion battery
Battery Level Indicator
After turning on the BS01, the power status indicator will display for 5 seconds.
Green = remaining battery power is 50%-100%.
Red = remaining battery power is 25%-50%
Flashing Red = remaining battery power is lower than 25%
Charging and Reverse Charging
While charging the bike light, the indicator will flash in red. Once it's fully charged,
the indicator will turn green.
The above mentioned parameters are based on tests according to international flashlight testing
standards (ANSI/NEMA FL1) using a 5,000mAh 21700 Li-ion battery in our laboratory. Results
may vary with different battery or under different environmental conditions.
To Next Page
Loading...