13 | P a g e
Figure 13: Set screws in transparent ring
Optional Extension Tube Accessory
To accommodate longer optical tubes, a 10-inch extension tube can be added to the top plate. A longer
tripod carrying case to accommodate the extension can also be purchased from the Software Bisque
Store.
The extension tube installation kit comes with the extension tube, an extension tube connector, and
eighteen 10-32x5/16-inch BHCPs (the eighteen include a few extra).
Installation Instructions
Remove the MYT Tripod’s top plate from the MYT Tripod by unscrewing and removing the knob then top
plate see Figure 14.
To Next Page
Loading...