Do you have a question about the Soho-PBX SP-108C and is the answer not in the manual?
Type | PBX System |
---|---|
Caller ID | Yes |
Weight | 1.5 kg |
Ports | 8 Ports |
Power Supply | AC 110-240V, 50/60Hz |
Dimensions | 200mm |
SOHO-PBX SP-108C offers low-cost professional telephone switching service with 1 CO line and up to 8 extensions.
PBX supports external FSK or DTMF Caller ID from local telephone company, requiring subscription and compatible phones.
Ensure unit is plugged in. Avoid dusty, wet, high-frequency, hot, humid, or TV-near environments.
Diagram illustrating the main unit, ports, and connections.
In case of power failure, CO line #1 is automatically connected to extension #1.
The SP-108C supports one CO line with three communication modes: CO line + extension, Extension + extension, CO line + extension + extension.
Connect a CO line to the SP-108C CO line port and analog phones to extension ports.
SP-108C has default settings. Programming is done from extension #1. Press '*' to redo incorrect instructions.
Suppress extension ringing on incoming CO line calls. Use '*#1n10' to enable, '*#1n00' to cancel.
Assign restrictions for outgoing calls, such as toll restriction or blocking all outgoing calls.
Disconnect outgoing calls after a set time limit. Use '*#3nMM#' for specific extensions.
Change existing extension numbers or restore the default numbering scheme.
Assigns attendant mode, allowing incoming calls to be greeted and routed based on dialed digits.
How to answer incoming calls, either via operator or manual attendant mode.
Instructions for making external calls from an extension.
How to make internal calls between extensions.
Allows transferring received incoming calls to another extension.
Procedure to initiate a conference call among two extensions and one CO line.
Secretary assisted dialing procedure to transfer an established call to another extension.
Allows a user from a non-ringing extension to answer an external incoming call.