SOL Smart Home Plc. info@solsmarthome.com www.solsmarthome.com
2. ATTACHMENTS
1) Bottom
2) Top
3) Water bowl
4) 1 Adapter (CE marked 230VAC/12VDC 1000MA)
5) 1 Filter
6) User Manual
7) Warranty card
Attachments or purchasable attachment depending on the type of the device:
8) 1 Ionizing unit
9) 1 Air-scenting unit
10) 1 Air-scenting package containing:
• Scenting head
• 2 perfume samples
11) Two types of additives (100 ml each)
3. SETTING UP
3.1 UNWRAPPING
1) Open the top of the box and take out the smaller box which contains the scenting
head and the 2 vials filled with perfume samples.
2) Take both parts out of the box carefully, starting with the top (chimney).
3) Remove the water bowl from the bottom.
4) After unwrapping, please check that you have all the attachments
listed in Part 2.
3.2 PLACING
To ensure maximal performance of the device, it is advised that you set it in a place
where it can create optimal airflow. Make sure there are no shelves or other objects
above or beside the device closer than 20-30 cm (8-12 inches) so that there are no
blockages at the inflow (at the side of the device) or the outflow (at the top of the
device). Please check the security warnings in Part 1 prior to placing the device.
To Next Page
Loading...
