26
FUNCTION MESSAGE COMMENT
Something is not working correctly
Fill the system with water
- RESET THE COFFEE-MAKER SOFT-
WARE by turning off the main switch
(position ‘0’), wait a few seconds and
then turn it on again. If, after turning off
and turning on the coffee-maker, the
symbol continues, THE COFFEE-MAK-
ER NEEDS TO BE REPAIRED AT AN
AUTHORISED TECHNICAL SERVICE
CENTRE. The coffee-maker will not
work until it has been repaired..
- The coffee-maker needs to fill its internal
circuits with water. Before transporting
the coffee-maker, the circuits are emp-
tied to prevent the forming of bacteria
and must then be refilled
To Next Page
Loading...
