Function Icon on display Comment
Lime scale removal. SELECT COFFEE/LIME SCALE REMOVAL. The coffee-maker will con-
tinue to make coffee but indicate that the lime scale needs to be
removed from the machine.
Cleaning the tray EMPTY THE DRIP TRAY AND FILL THE WATER TANK WITH CLEAN
at the end of WATER. The coffee-maker has finished removing the lime scale
the lime scale from the pipes and has poured the removal agent on to the drip
removal process. tray, which is now full. First of all, empty it and then fill the water
tank with clean water for the rinse cycle.
Something is not RESET THE COFFEE-MAKER SOFTWARE by turning off the main
working correctly. switch (position ‘0’), wait a few seconds and then turn it on again.
If, after turning off and turning on the coffee-maker, the symbol
continues, THE COFFEE-MAKER NEEDS TO BE REPAIRED AT AN AU-
THORISED TECHNICAL SERVICE CENTRE. The coffee-maker will not
work until it has been repaired.
N.B. When the situation has been corrected, the coffee-maker is again
ready to make coffee.
26
To Next Page
Loading...
Need help?
General
